Accelerometers by Monitran

General Purpose Analysis

Monitran General Purpose Analysis Sensors are ideal for use with portable and on-line vibration analysers, providing the user with a complete spectrum of vibration intensity against frequency. Changes in this spectrum allow the user to determine the health of the machinery to which the sensor is attached. Most analysers will store the spectral values and monitor changes over a period of time, allowing prediction of expected component life and enabling efficient planning of maintenance schedules.

This type of information is required in a wide range of environments so while the basic output is common to all sensors in this category there are many variations allowing them to be used in those different environments ranging from:

  • standard industrial conditions
  • submersible and long term wet operation
  • approved under ATEX, IECEx and ANZEx for use in hazardous areas
  • restricted access locations

Two series are available: our long-standing, tried and trusted 1100 range and the newly available 2200 range with enhanced performance for more demanding applications. The 2200 series sensors feature high performance electronics giving:

  • increased shock resistance eliminating signal interruption during high shock loading episodes
  • a stable bias across the temperature range eliminating sensitivity changes at high temperature

MTN/1100, C

MTN/1100 vibration sensorGeneral purpose top-entry constant current accelerometer with isolated AC output. Made from robust stainless steel throughout for long term vibration analysis in harsh environments.
Sealed to IP67 and includes 2-pin MS connector or integral stainless overbraided ETFE cable and is available with a wide range of mountings.

MTN/1100C  MTN/1100

MTN/1100I, C

MTN/1100I hazardous area accelerometerATEX and IECEx Group I & II certified. General purpose top-entry constant current accelerometer with isolated AC output. Made from robust stainless steel throughout for long term vibration analysis in harsh, hazardous gas and dust environments.

Sealed to IP67 and includes 2-pin MS connector or integral stainless overbraided ETFE cable and is available with a wide range of mountings.

MTN/M1100IC  MTN/M1100I  MTN/1100IC  MTN/1100I

MTN/1100W

MTN/1100W waterproof vibration sensorSubmersible, general purpose, top-entry, constant current accelerometer with isolated AC output. Made from robust stainless steel throughout for long term vibration analysis in harsh underwater environments and areas with constant moisture or condensation.
Sealed to IP68 and includes integral heavy duty polyurethane cable. Available with a wide range of mountings.

MTN/1100W

MTN/1100IW

MTN/1100IW hazardous area waterproof vibration sensorATEX and IECEx Group II certified. Submersible, general purpose, top-entry, constant current accelerometer with isolated AC output. Made from robust stainless steel throughout for long term vibration analysis in harsh underwater environments and areas with constant moisture or condensation.
Sealed to IP68 and includes integral heavy duty polyurethane cable. Available with a wide range of mountings.

MTN/1100IW

MTN/1100S, C

MTN/1100S side entry accelerometerGeneral purpose, side-entry, constant current accelerometer with isolated AC output. Made from robust stainless steel throughout for long term vibration analysis in harsh environments.
Sealed to IP67 and includes 2-pin MS connector or integral stainless steel overbraided ETFE cable and ¼”-28 UNF, M6 or M8 mounting bolt.

MTN/1100SC  MTN/1100S

MTN/1100IS, C

MTN/1100IS hazardous area side entry accelerometerATEX and IECEx Group I & II certified. General purpose side-entry constant current accelerometer with isolated AC output. Made from robust stainless steel throughout for long term vibration analysis in harsh, hazardous gas and dust environments.
Sealed to IP67 and includes 2-pin MS connector or integral stainless steel overbraided ETFE cable and ¼”-28 UNF, M6 or M8 mounting bolt.

MTN/M1100ISC  MTN/M1100IS  MTN/1100ISC  MTN/1100IS

MTN/1100SW

MTN/1100SW waterproof side entry sensorSubmersible, general purpose, side-entry constant current accelerometer with isolated AC output. Made from robust stainless steel throughout for long term vibration analysis in harsh underwater environments and areas with constant moisture or condensation.
Sealed to IP68 and includes integral heavy duty polyurethane cable and ¼”-28UNF, M6 or M8 mounting bolt.

MTN/1100SW

MTN/1100ISW

MTN/1100ISW hazardous side entry waterproof vibration sensorATEX and IECEx Group II certified. Submersible, general purpose, side-entry, constant current accelerometer with isolated AC output. Made from robust stainless steel throughout for long term vibration analysis in harsh underwater environments and areas with constant moisture or condensation.
Sealed to IP68 and includes integral heavy duty polyurethane cable. ¼”-28UNF, M6 and M8 mounting bolts also available.

MTN/1100ISW

MTN/2200, 4P, C

MTN/2200 accelerometerGeneral purpose top-entry constant current accelerometer with isolated AC output. Made from robust stainless steel throughout for long term vibration analysis in harsh environments. Internal electronics are isolated to minimise noise with increased bias voltage stability.
Sealed to IP67 and includes 2-pin MS connector, 4-pin M12 connector or stainless steel overbraided ETFE cable and is available with a wide range of mountings.

MTN/2200-4P  MTN/2200C  MTN/2200

MTN/2200I, 4P, C

MTN/2200I hazardous area accelerometerATEX and IECEx Group I & II certified. General purpose top-entry constant current accelerometer with isolated AC output. Made from robust stainless steel throughout for long term vibration analysis in harsh, hazardous gas and dust environments. Internal electronics are isolated to minimise noise with increased bias voltage stability.
Sealed to IP67 and includes 2-pin MS connector, 4-pin M12 connector or stainless steel overbraided ETFE cable and is available with a wide range of mountings.

MTN/M2200IC  MTN/M2200I  MTN/2200IC  MTN/2200I-4P  MTN/2200I

MTN/2200W

MTN/2200W waterproof vibration sensorSubmersible, general purpose, top-entry constant current accelerometer with isolated AC output. Made from robust stainless steel throughout for long term vibration analysis in harsh underwater environments. Internal electronics are isolated to minimise noise with increased bias voltage stability.
Sealed to IP68 and includes integral heavy duty polyurethane cable. Available with a wide range of mountings.

MTN/2200W

MTN/2200IW

MTN/2200IW hazardous area waterproof accelerometerATEX and IECEx Group II certified. Submersible, general purpose, top-entry constant current accelerometer with isolated AC output. Made from robust stainless steel throughout for long term vibration analysis in harsh underwater environments and areas with constant moisture or condensation. Internal electronics are isolated to minimise noise with increased bias voltage stability.
Sealed to IP68 and includes integral heavy duty polyurethane cable. Available with a wide range of mountings.

MTN/M2200IW MTN/2200IW

MTN/2200S, 4P, C

MTN/2200S side entry vibration sensorGeneral purpose, side-entry constant current accelerometer with isolated AC output. Made from robust stainless steel throughout for long term vibration analysis in harsh environments. Internal electronics are isolated to minimise noise with increased bias voltage stability.
Sealed to IP67 and includes 2-pin MS connector, 4-pin M12 connector or stainless steel overbraided ETFE cable and is available with a wide range of mountings.

MTN/2200SC  MTN/2200S-4P  MTN/2200S

MTN/2200IS, 4P, C

MTN/2200IS hazardous area side entry accelerometerATEX and IECEx Group I & II certified. General purpose side-entry constant current accelerometer with isolated AC output. Made from robust stainless steel throughout for long term vibration analysis in harsh, hazardous gas and dust environments. Internal electronics are isolated to minimise noise with increased bias voltage stability.
Sealed to IP67 and includes 2-pin MS connector, 4-pin M12 connector or stainless steel overbraided ETFE cable and is available with a wide range of mountings.

MTN/M2200ISC MTN/M2200IS MTN/2200ISC  MTN/2200IS-4P  MTN/2200IS

MTN/2200SW

MTN/2200SW side entry waterproof vibration sensorSubmersible, general purpose, side-entry constant current accelerometer with isolated AC output. Made from robust stainless steel throughout for long term vibration analysis in harsh underwater environments. Internal electronics are isolated to minimise noise with increased bias voltage stability.
Sealed to IP68 and includes integral heavy duty polyurethane cable. Available with a wide range of mountings.

MTN/2200SW

MTN/2200ISW

MTN/220ISW hazardous area side entry waterproof accelerometerATEX and IECEx Group II certified. Submersible, general purpose, side-entry constant current accelerometer with isolated AC output. Made from robust stainless steel throughout for long term vibration analysis in harsh underwater environments and areas with constant moisture or condensation. Internal electronics are isolated to minimise noise with increased bias voltage stability
Sealed to IP68 and includes integral heavy duty polyurethane cable. Available with a wide range of mountings.

MTN/2200ISW

MTN/1107I, IC

MTN/1107I vibration sensorATEX and IECEx Group I & II certified. General purpose, top-entry, constant current accelerometer with isolated AC output. Made from robust stainless steel throughout for long term vibration analysis in harsh, hazardous gas and dust environments. 3 wire device, requires 24V supply.

Sealed to IP67 and includes 3-pin 62GB connector or stainless steel overbraided ETFE cable and is available with a wide range of mountings

  • Environment: Industrial, Hazardous, *Mining
  • Frequency Range: 2Hz - 12kHz
  • Temperature Range: -55°C – 140°C
  • Output: AC 100mV/g
  • Entry Type: Top Entry
MTN/1107I

MTN/1109I, IC

MTN/1109I sensorATEX and IECEx Group I & II certified. General purpose, top-entry, constant current accelerometer with isolated AC output. Made from robust stainless steel throughout for long term vibration analysis in harsh, hazardous gas and dust environments. 3 wire device, requires -24V supply.

Sealed to IP67 and includes 3-pin 62GB connector or stainless steel overbraided ETFE cable and is available with a wide range of mountings.

  • Environment: Industrial, Hazardous, *Mining
  • Frequency Range: 2Hz - 12kHz
  • Temperature Range: -55°C – 140°C
  • Output: AC 100mV/g
  • Entry Type: Top Entry
MTN/1109IC MTN/1109I

MTN/1107, C

MTN/1107 sensorGeneral purpose, top-entry, constant current accelerometer with isolated AC output. Made from robust stainless steel throughout for long term vibration analysis in harsh environments. 3 wire device, requires 24V supply.

Sealed to IP67 and includes 3-pin 62GB connector or integral stainless overbraided ETFE cable and is available with a wide range of mountings.

  • Environment: Industrial
  • Frequency Range: 2Hz - 12kHz
  • Temperature Range: -55°C – 140°C
  • Output: AC 100mV/g
  • Entry Type: Top Entry
MTN/1107C

MTN/1109, C

MTN/1109 sensorGeneral purpose, top-entry, constant current accelerometer with isolated AC output. Made from robust stainless steel throughout for long term vibration analysis in harsh environments. 3 wire device, requires -24V supply.

Sealed to IP67 and includes 3-pin 62GB connector or integral stainless steel overbraided ETFE cable and is available with a wide range of mountings.

  • Environment: Industrial
  • Frequency Range: 2Hz - 12kHz
  • Temperature Range: -55°C – 140°C
  • Output: AC 100mV/g
  • Entry Type: Top Entry
MTN/1109C MTN/1109

call us on +44 (0) 1494 816569

Monitran Product Range

accelerometers

Accelerometers

Ideal for use with portable and on-line vibration analysers.

monitoring systems

Monitoring Systems

Monitoring systems that can be used to measure vibration.

enclosures

Enclosures

Switch Enclosures and Connection Enclosures by Monitran.

linear variable differential transformer

LVDT's

LVDT'S are a popular tansducer in industrial applications.

eddy current probes and drivers

ECPD

The latest precision-wound copper coil Proximity Sensors.

accessories

Accessories

Allowing the user access to a vibration sensor for machinery.


Monitran logo

Established in 1986, Monitran remains a privately owned company, based near High Wycombe 35 miles west of London.

We manufacture in the United Kingdom and source the majority of our materials and components from selected quality-managed local and national suppliers.

Call Us: +44 (0)1494 816569

Monitor House
33 Hazlemere Road
Penn
HP10 8AD
UK