Brochures

2200 Series Sensor Guide

Table of contents:

• Introduction
• Services
• Monitoring
• Analysis
• Special Purpose
• Accessories

Condition Monitoring Flyer

The MTN/5032 is a cost-effective, versatile and easy-to-use microcontroller-based condition monitoring system.

Available with up to 96 channels*, the MTN/5000 is ideal for viewing the health of plant and equipment, raising alarms and indicating when further investigations may be warranted.

Displacement (LVDTs)

Our Linear Variable Differential Transformers (LVDT) are available in two series; Industrial and Miniature.

Industrial: This series has been designed for use in relatively harsh environments and processing areas.

Minature: LVDTs in this series are ideal for use in applications where space is limited.

LVDT Guide

Whilst there are several ways to measure displacement, the Linear Variable Differential Transformer (LVDT) remains a popular transducer in most industrial applications. LVDTs initially were used as a means of taking dimensional readings in laboratories. 

Eddy Current Probe Guide

Your first choice for vibration, displacement and proximity measurement

Monitran eddy current probes provide simple, cost-effective solutions whenever you need rapid-response, non-contact measurement of vibration, proximity or displacement in your static or rotating machinery.

General Purpose Analysis Sensors

General purpose constant current accelerometers with isolated AC output. Made from robust stainless steel throughout for long term vibration analysis in harsh environments.

Our general purpose analysis sensors are ideal for use with portable and on-line vibration analysers, providing the user with a complete spectrum of vibration intensity against frequency.

General Purpose Monitoring Sensors

General purpose velocity transducers with DC output. Made from robust stainless steel throughout for continuous vibration monitoring in harsh environments.

Our general purpose monitoring sensors are ideal for use with PLCs and other industrial controllers to provide the user with a continuous 4-20mA vibration output.

MTN5000 Brochure

The MTN/5000 is a cost-effective, versatile and easy-to-use condition monitoring system for viewing the health of plant and equipment, raising alarms and indicating when further investigations may be warranted.

MTN/5032 Brochure

The MTN/5032 is a cost-effective, versatile and easy-to-use condition monitoring system for viewing the health of plant and equipment,raising alarms and indicating when further investigations may be warranted.

Product Guide

Monitran's general purpose accelerometers fall into two categories; those for general purpose analysis, which have AC outputs and are suitable for use with hand held and on-line vibration analysers; and those for machine protection, which have DC outputs and are ideal for direct input to a PLC or other inductial controller.

Product Selection Guide

The analysis sensor can be used to measure both acceleration and velocity, whereas the monitoring sensor can measure only velocity. Larger installations are more often than not installed with MTN/1100 units. When analysis isn’t required, only straightforward movement measurement which can be input directly into a PLC, the vibration monitoring sensor should be used (MTN/1185).

Vibration Sensors

We have extensive ranges of both general and special purpose vibration sensors, suitable for use in a wide variety of analysis and monitoring applications. All are made from robust stainless steel, are typically available as top or side entry and with an integral cable or connector.